Product Description

The laboratory spray dryer is designed especially for laboratories or research institutes carrying out test work and exploring the possibilities of spray drying.

Working Principle

Spray drying is accomplished by dissolving, emulsifying or dispersing the core substance in a solution of carrier material. The material is atomized and sprayed into the drying chamber where a hot stream of drying gas helps evaporate the water to produce dry solid particles. These particles are further separated from the gas stream and collected using centrifugal forces with a cyclone.

Features and Benefits

LCD touch screen parameter displays the temperature. pump speed, air volume.

Automatic control, the pump auto starts when the temperature reaches the setting data.

The nozzle cleaning needle automatically cleans the blockage if necessary

The fan will keep running to protect the heater until the temperature is lower than 60℃.

PID constant temperature control and the heating temperature control accuracy is ±1℃.

The Product particle size has a narrow distribution, uniform size, and good flowability.

Built-in oil-free air compressor with low noise, less than 60db.

Note:

All data provided is for guidance only and may be varied by the properties of materials.

We reserve the right to modify the design without notice.